At the beginning it is important to prepare the area where you plan to set the rolled sod. Experts advise to slightly dig up the soil and remove stones, roots and weeds. If the soil has a high clay content, you can scatter some sand in order to loosen up the soil. If it is too sandy, bark humus or native soil helps to strengthen it. Afterwards you should compress the soil, for example by help of a barrel. The soil should be left to rest for about two weeks. Don’t forget to keep it moist so that the soil can continue to settle down.
Now it is time to install the rolled sod. Before you begin with this process, we recommend distributing some fertilizer on the compressed soil. Next water it and slightly loosen up the first layer of earth with a rake to mix the fertilizer with the soil.
Now you can really start with the laying out process. Make sure to install the first row parallel to a straight edge. The following rows are layed like roof tiles, i.e. somewhat shifted compared to the one before. Keep in mind that you should always install the rows straight avoiding big spaces between them. If there is any overhanging sod, cut it off with a sharp knife.
Attention! Make sure to install the rolled sod at the delivery day, otherwise it may run dry. If storage is unavoidable, you should look for a cool and shady place.
Now your lawn is almost ready for springtime. In order to keep the grass green, it is necessary that roots ingrain with the ground. Rolling the new green area helps the soil and roots to get contact. Additionally, it is important to water the newly set rolled sod. The roots are then able to absorb nutrients. 10 to 20 litres per square meter is advised. After about two weeks the fresh lawn should have ingrained completely with the ground. Now, it is sufficient to water your new lawn during dry and hot weather periods.
The first lawn cut should be carried out when the grass is about six centimeters high. When mowing, make sure to cut only the top third of the grass to help the grass grow strongly.