📖
GARDENA SILENO city, smart SILENO city
Introduction
Introduction
Support
Product description
Mowing technique
Find the charging station
Product overview
Symbols on the product
Symbols on the display
Symbols on the battery
General manual instructions
Menu structure overview 1
Menu structure overview 2
Display
Keypad
Safety
Safety information
IMPORTANT. READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE
Safety definitions
Safety instructions for operation
Use
Battery safety
How to lift and move the product
Maintenance
In the event of a thunderstorm
Installation
Introduction - Installation
Main components for installation
General preparations
Before the installation of the wires
To examine where to put the charging station
To examine where to put the power supply
To examine where to put the boundary wire
To put the boundary wire in a slope
Passages
To make an island
To make a secondary area
To examine where to put the guide wire
Work area examples
Installation of the product
Installation tools
To install the charging station
To install the boundary wire
To install the guide wire
To put the wire into position with stakes
To bury the boundary wire or the guide wire
To extend the boundary wire or the guide wire
After the installation of the product
To do a visual check of the charging station
To do the basic settings
Guide calibration
To redo the guide calibration
To do the product settings
Menu structure
To get access to the menu
To do the schedule settings
Wizard
To set the schedule
Make an estimate of the necessary operating time
To copy the schedule setting
To reset the schedule setting
SensorControl
To set the SensorControl
To set the SensorControl frequency
Security level
To set the security level
Security - Advanced
To make a new loop signal
To change the PIN-code
Lawn Coverage and CorridorCut
To set the Lawn Coverage function
To set the CorridorCut function
To do a test of the Lawn Coverage function
To measure the distance from the charging station
To disable or enable the Lawn Coverage function
To reset the Lawn Coverage settings
Starting point
To set the starting point
Drive Past Wire function
To set the Drive Past Wire function
ECO mode
To set the ECO mode
To avoid collisions with GARDENA mower house
Frost Sensor
To set the Frost Sensor
General
To set the time & date
To set the language
To set the country
To set the unit format
To reset all user settings
The About menu
GARDENA smart system
To set the Activate Inclusion Mode
Inclusion in the App
To download the GARDENA smart system app
To select Exclude device
To do a check of the status for GARDENA smart system
Operation
The ON/OFF button
The indicator lamp
To start the product
Operating modes
Main area
Secondary area
Park
Park / Schedule
Override schedule
Spot cutting
To stop the product
To switch off the product
To charge the battery
Adjust the cutting height
To adjust the cutting height
Maintenance
Introduction - maintenance
Clean the product
Chassis and blade disc
Wheels
The body of the product
Charging station
Replace the blades
To replace the blades
Firmware update
To update the firmware
Battery
To replace the battery
Winter service
Troubleshooting
Introduction - troubleshooting
To get access to the Quick info menu
Fault messages
Information messages
Indicator lamp in the charging station
Symptoms
Find breaks in the loop wire
Transportation, storage and disposal
Transportation
Storage
Disposal
Technical data
Technical data
Warranty
Warranty terms
Applicable to US/CA market
Supplier's Declaration of Conformity
Compliance requirements