Micro-Drip vanding højbedsæt (60 m2)

Varenummer 13450-20

Specifikationer
Funktioner
Service & manualer

Vand- og tidsbesparende drypvanding af grøntsager og blomsterbede på op til 60 m²

Micro-Drip vanding højbedsæt (60 m2) fra GARDENA er ideelt, hvis du vil effektivt vande plante- og blomsterbede på op til 60 m² med en finregn. Med startsættet er du klar til at komme i gang med at samle komponenterne med nogle få enkle trin. Takket være de medfølgende forlængerrør og de to forskellige sprøjtedyser vil dine planter blive vandet optimalt selv efter vækst. Sættet vokser med dine planter. Øg sprøjtehøjden med et forlængerrør for at fortsætte med at vande dine grøntsager eller blomster ovenfra med en finregn. Du kan indstille vandingsområdet ved hjælp af reguleringsventilerne. Takket være den patenterede Quick & Easy-tilslutningsteknologi kan du til enhver tid omarrangere Micro-Drip-System-komponenterne i sættet og genbruge dem fleksibelt uden at beskadige dem. Dette gør dem bæredygtige. For en mere bekvem vanding kan du kombinere sættet med en GARDENA Water Control (såsom Water Control Select ref. nr. 1891-28). På denne måde kan du indstille vandingsplaner, og dine planter vil blive vandet helt automatisk, selv når du ikke er hjemme. Micro-Drip-System. Omtanke for dine planter og hver en dyrebar dråbe. Nem, nøjagtig, tidsbesparende vanding.

Tekniske specifikationer

Kommerciel reference

13450-20

GTIN-13/EAN

4066407003040

Specifikationer

Tilbehør

1 Master Unit 1000, 1 Installation Tool, 25 m Connecting Pipe Flex 13 mm (1/2"), 15 Pipe Pegs 13 mm (1/2"), 2 T-Joints 13 mm (1/2"), 2 L-Joints 13 mm (1/2"), 3 Plugs 13 mm (1/2"), 5 Control Valves 4.6 mm (3/16"), 4 Spray Nozzles 90°, 1 Spray Nozzle 360°, 5 Extension Pipes

Brug

For up to 60 m² vegetable bed/flower border

Funktioner

1/6

Water-saving and fine-spraying irrigation set for vegetable/planting areas up to 60 m².

The set is ideally suited for water-saving irrigation of vegetable and flower beds with an area of up to 60 m². Due to the area-covering, fine-spray nozzles, the irrigation is even.
2/6

Quickly installed Ready-2-use set

The set is ready for immediate use as it contains all the necessary components for fine irrigation of areas of up to 60 m². Installation in three easy steps: lay the Connecting Pipe to the plants, adjust the pipe and then place the spray nozzles at the corner and in the middle - done!
3/6

Adapts to the plant growth

Thanks to the included Extension Pipes, the Micro-Drip-System can grow with the plants. For further spraying from above, the spraying height is simply adjusted. The Regulating Valves also allow flexible adjustment of the spraying range.
4/6

Sustainable thanks to patented Quick & Easy connection technology

All 13 mm components of the set, such as the Connecting Pipes, can be quickly and flexibly rearranged at any time thanks to the patented Quick & Easy connection technology. They are reusable and therefore sustainable. Even after repeated use, they do not get damaged.
5/6

Can be combined with Water Control

The set can be flexibly expanded with the GARDENA Micro-Drip components. In combination with, for example, the Water Control Select (art. no. 1891-20), an even more convenient and time-saving automatic irrigation is made possible.
6/6

Set Contents

The set contains one Master Unit 1000, one Assembly Tool, one Spray Nozzle 360°, two T-Joints 13 mm (1/2"), two L-Joints 13 mm (1/2"), three End Plugs 13 mm (1/2"), four Spray Nozzles 90°, five Regulating Valves 4.6 mm (3/16"), five Extension Pipes for spray nozzles, 15 Peg Pipes13 mm (1/2") and one 25 m long Connecting Pipe 13 mm (1/2").