The adjustable Inline Drip Head is ideally suited – as part of the GARDENA Micro-Drip-System – for irrigation of shorter plant rows with varying water requirements. Using the Inline Drip Head, the required water quantity can be adjusted. In this way, 0 to approx. 20 litres per hour can be provided. The cover is detachable and has an integrated cleaning needle that allows easy cleaning of a dirtied drip head. Ten drip heads and one cap are included.
With the Micro-Drip-System drip irrigation, the water quantity per plant can be exactly dosed, so that no water is wasted.
Depending on the requirements of the individual plants, between 1 and 8 litres per hour can be provided.
Through the patented "Quick & Easy" connection technology, all components can be effortlessly combined and easily separated again if required.
Thanks to the removable cover with integrated cleaning needle, the needle is always accessible and can be easily used to clean the drip head.
With the GARDENA Inline Drip Head, plant rows with similar water requirements can be easily irrigated and water can be saved.
| Referência comercial | Artigo n.º | Adicionar à lista de desejos |
|---|---|---|
| 1392-20 | 900 91 51-01 | |
| 1392-26 | 966 48 69-01 | |
| 1392-50 | 900 91 52-01 |
Visite a secção de Manuais de instruções e documentação para procurar e descarregar manuais de operação e outra documentação da GARDENA
Manuais de instruções
|
Tubo de Distribuição 4,6 mm (3/16") GARDENA
The GARDENA Supply Pipe 4.6 mm (3/16") is the supply pipe for Drip Heads and Spray Nozzles. It is UV-resistant and impervious to light, thereby guaranteeing long use. It can be installed above and below ground. The length of the pipe is 50 metres. |
|
Tubo de Distribuição 4,6 mm (3/16") GARDENA
The GARDENA Supply Pipe 4.6 mm (3/16") is the supply pipe for Drip Heads and Spray Nozzles. It is UV-resistant and impervious to light, thereby guaranteeing long use. It can be installed above and below ground. The length of the pipe is 15 metres. |
|
Bujão de fecho 4,6 mm (3/16") GARDENA
The GARDENA Plug as part of the GARDENA Micro-Drip-System seals the hole in the Connecting Pipe or seals off the Supply Pipe. Ten pieces are included. |
|
União em T 4,6 mm (3/16") GARDENA
The GARDENA T-Joint as part of the GARDENA Micro-Drip-System serves to branch the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten T-Joints are included. |
|
Peça de ligação em cruz 4,6 mm (3/16") GARDENA
The GARDENA 4-Way Coupling as part of the GARDENA Micro-Drip-System serves to branch the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten pieces are included. |
|
União normal 4,6 mm (3/16") GARDENA
The GARDENA Connector as part of the GARDENA Micro-Drip-System serves to extend the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten pieces are included. |
|
Torneira de passagem 4,6 mm (3/16") GARDENA
The GARDENA Shut-Off Valve 4.6 mm (3/16") as part of the GARDENA Micro-Drip-System serves to shut off individual lines of Supply Pipes. With the Shut-Off Valve, the throw of the Micro Rotor Sprinkler 360° can be infinitely adjusted. Thanks to the... |
|
Ligação em L 4,6 mm (3/16") GARDENA
The GARDENA L-Joint as part of the GARDENA Micro-Drip-System allows exact changing of direction of the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten L-Joints are included. |
Ergonómico, funcional, prático
Mangueira com revestimento SkinTech para níveis de exigência superiores, com 13 mm (1/2"), 30 m, sem acessórios de sistema
| Sacho para arrancar ervas (3517) | ||
| EasyCut 50-Li (8873) | ||
| Aspersor oscilante Premium 250 GARDENA (8151) |
