When water enters where it is not supposed to, you need to react quickly to prevent greater damage e.g. in the home. The GARDENA Premium Submersible Pump 21000 inox is just the right pump if you need to quickly and powerfully drain lots of water at once. Up to 21,000 litres per hour can be pumped with clear and lightly dirtied water with up to 5 mm particle diameter. Equipped with an adjustable switching base, flat suctioning up to 1 mm is possible. Nearly the entire water is drained and a wipe-dry floor is the result. A Float Switch ensures automatic cut-in and cut-out. Through a cable holder for the Float Switch, the cut-in and cut-out levels are variable and can be precisely adjusted. If required, you can also switch to permanent manual pump operation via a plug-in device. Thanks to the 10-metre-long connection cable the practical and robust pump can be universally used - also in great depths. The use of high-quality materials fulfils highest demands on the premium model. The pump has a housing made of stainless steel that renders it highly robust and longlife. A low-wear pump impeller and a low-noise, maintenance-free capacitor motor with thermal protection switch allow reliable pump operation. Thanks to the universal connection,13 mm (1/2")-, 16 mm (5/8")-, 19 mm (3/4")-, 25 mm (1")-, 38 mm (1 ½")- and 50 mm (2") hoses can be connected to the pump.

Localize o revendedor mais próximo de si
  • High-performance

    High-performance

    Up to 21,000 litres per hour can be pumped with the Premium Submersible Pump, to effectively drain or transfer water.

  • Wipe-dry draining up to 1mm

    Wipe-dry draining up to 1mm

    The adjustable switching base of the pump allows a flat suction up to a minimum residual water level of 1mm. Nearly all water is suctioned from the ground for a wipe-dry result.

  • Permanent manual operation

    Thanks to the individually adjustable cut-in and cut-out sensors, manual operation is also possible.

  • Problem-free use

    Problem-free use

    A robust housing made of fibre-glass reinforced plastic, a low-wear pump impeller and a low-noise, maintenance-free capacitor motor with thermal overload protection guarantee a long life.

  • Individual connection

    Through the universal connection, hoses with 13mm (1/2") to 50 mm (2") can be used.

Especificações
Potência nominal 1000 W
Débito máximo 21000 l/h
Altura manométrica máxima 11 m
Flat suction down to 3 mm
Max pressure 1,1 bar
Max submersion depth 7 m
Sucção auto-escorvante máxima 8 m
Maximum particle size 5 mm
Max liquid temperature 35 ° C
Peso 8,3 kg
Comprimento do cabo 10 m
Power cable type H07 RNF
Classe de protecção eléctrica IP X8
Artigos e preços
Referência comercial Artigo n.º Add to wish list
1787-20 900 95 44-01

Manuais e documentação

Manuais e documentação

Visite a secção de Manuais de instruções e documentação para procurar e descarregar manuais de operação e outra documentação da GARDENA

Manuais de instruções
Acessórios
Pump Connection Set for 13 mm (1/2") hoses Pump Connection Set for 13 mm (1/2") hoses

For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.
Conjunto de ligações para bombas GARDENA Conjunto de ligações para bombas GARDENA

For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.