For deep drilled- or driven wells with narrow diameters as of 10 cm, the Deep Well Pump 5500 inox inox is just the right product. It pumps water from up to 20 metres depth – even when submerged long-term - e.g. for irrigation of your garden. The stainless steel housing allows long-term and safe operation under water. Only robust and high-quality materials are used. The filter – also made of stainless steel – prevents the entry of impurities into the pump. In addition, a foot can be mounted which, through the higher level and particularly in the case of cisterns, significantly reduces the suctioning of debris and sand on the ground. A thermal overload switch protects the low-noise and maintenance-free capacitor motor against overload. An energy-saving motor powerfully pumps the water through a 6-stage feed impeller efficiently and quietly from up to 20 metres depth. Practical: thanks to a 22-metre-long connecting cable, the pump is quickly installed, and with a supplied fastening rope, can be easily submerged or drawn back up if required.

Localize o revendedor mais próximo de si
  • For narrow openings

    For narrow openings

    With a diameter of only 9.8 cm, the compact Deep Well Pump is ideal for all drilled wells reaching to great depths and which are only reachable through narrow openings.

  • Robust and reliable

    Robust and reliable

    The stainless steel housing protects the pump from damage, thereby guaranteeing a long life and safe operation under water.

  • High-performance

    High-performance

    The water flows through a 6-stage feed impeller and thereby guarantees high-performance and low-noise pumping of water at the desired site.

  • Saves energy

    Thanks to the high-performance, maintenance-free capacitor motor, the Deep Well Pump is highly energy-saving – without compromising efficiency.

  • Protection against impurities

    An integrated stainless steel filter prevents the pump from suctioning sand and debris that could lead to damage. In addition, a foot can be mounted which, through the higher level and particularly in cisterns, additionally protects against impurities.

Especificações
Potência nominal 850 W
Débito máximo 5500 l/h
Max pressure 4,5 bar
Max submersion depth 19 m
Altura manométrica máxima 45 m
Fastening rope 22 m
Pump diameter 9,8 cm
Feed impeller 6 Stages
Max liquid temperature 35 ° C
Peso 7,5 kg
Comprimento do cabo 22 m
Power cable type H07 RNF
Classe de protecção eléctrica IP X8
Artigos e preços
Referência comercial Artigo n.º Add to wish list
1489-20 966 42 41-01

Manuais e documentação

Manuais e documentação

Visite a secção de Manuais de instruções e documentação para procurar e descarregar manuais de operação e outra documentação da GARDENA

Manuais de instruções
Acessórios
Ligações para bombas GARDENA Ligações para bombas GARDENA

With this fitting, Garden Pumps, Electronic Pressure Pumps, Pressure Tank Units and Submersible Pressure Pumps with female thread can be easily connected to the GARDENA hose connection system. Mating thread: 33.3 mm (G 1)/33.3 mm (G 1).
Pump Connection Set for 13 mm (1/2") hoses Pump Connection Set for 13 mm (1/2") hoses

For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.
Conjunto de ligações para bombas GARDENA Conjunto de ligações para bombas GARDENA

For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.
Interruptor flutuante GARDENA Interruptor flutuante GARDENA

Ideal for use with the Submersible- and Submersible Pressure Pumps, Garden Pumps and Pressure Tank Units; depending on the water level, automatically switches the pump on and off. Equipped with a 10 m long special power cable H07 RNF.
Interruptor electrónico manométrico com stop anti-retorno GARDENA Interruptor electrónico manométrico com stop anti-retorno GARDENA

With the Electronic Manometric Switch, a Garden Pump can be easily converted to an Electronic Pressure Pump. The push-button has 3 functions: 1. It automatically switches the pump on when the water pressure falls and off again when the maximum...
Válvula anti funcionamento em seco GARDENA Válvula anti funcionamento em seco GARDENA

The Dry-running Safety automatically switches the pump off in the absence of pumping media and thereby protects, e.g. a Garden Pump, Submersible Pump or Pressure Tank Unit against damages. It has a 33.3 mm (G 1) mating thread.