We use cookies to improve your experience on our website. By continuing to browse this website you are agreeing to our use of cookies. Find out more by reading Cookies

How do I find a breakage of the boundary wire?

Breaks in the loop wire are usually the result of unconscious physical damage to the cable such as when gardening with a shovel. Breaks can also be due to the high tension in the wire during installation. Mowing the grass too low right after the installation can damage cable insulation. A defective splicing of the loop wire can also lead to disruptions several weeks after the splice was formed.

A wire break can be located by gradually halving the distance of the loop where the break may have occurred until there is only a very short section of the wire left.

See the instructions in the Operator’s Manual for more detailed information

There is an error message in the display – what do I do?

In the Operator’s Manual there is a list of the most common error messages and recommended actions.

Get inspirational gardening tips! Sign up for the monthly GARDENA digital newsletter.