Мы используем файлы cookie для оптимизации предоставления данных на нашем веб-сайте. Оставаясь на данном веб-сайте, Вы соглашаетесь на использование нами файлов cookie. Узнайте больше здесь Файлы cookie
Устаревшая продукция!

The GARDENA Pressure Tank Units 4000-5 are ideally suited for stationary installation as a permanent element of your water supply. Whether you use free rainwater for the home - e.g. for flushing the toilet or for the washing machine - or whether you use it to irrigate your garden – you can flexibly decide. Due to the compact design, the pump can be installed in a space-saving fashion. The Pressure Tank Unit is serially equipped with a pre-filter, that protects the pump against debris and sand, and with a backflow preventer. Both functions ensure a fast installation and a reliable and long-life pump operation. For easy and problem-free initial operation, a large filling opening facilitates filling of the pump. Thanks to the water tank, which has a capacity of 24 litres, the pump can first take from these reserves before being automatically activated or deactivated by the integrated pressure switch. Only high-quality materials are used in the pump for high-performance and low-noise operation. A maintenance-free capacitor motor with thermal overload protection efficiently pumps the water through a jet-pump system via pressure at the desired site. An integrated Manometer constantly shows you the current pressure level. Practical: if required, the pump can be easily drained before frost sets in via a drain screw.

Номер: 1772
  • Easy installation

    Easy installation

    Pre-filter and backflow preventer are already serially integrated in the product as necessary accessories. That saves costs and troublesome installation efforts.

  • Saves energy and is convenient

    Saves energy and is convenient

    Smaller required water quantities are taken from the water tank, without activation of the pump. That saves energy. An Electronic Manometric Switch independently activates the pump when larger water quantities are required, and then automatically switches it off afterward. It could not be more convenient.

    Smaller required water quantities are taken from the water tank, without activation of the pump. That saves energy. An Electronic Manometric Switch independently activates the pump when larger water quantities are required, and then automatically switches it off afterward. It could not be more convenient.

  • Problem-free initial operation

    Problem-free initial operation

    A large filling opening allows fast and problem-free initial operation. A rotary function switch and a bleed valve ensure optimal self-priming and problem-free operation.

    A large filling opening allows fast and problem-free initial operation. A rotary function switch and a bleed valve ensure optimal self-priming and problem-free operation.

  • Uninterrupted operation

    Uninterrupted operation

    A maintenance-free capacitor motor with thermal overload protection and a large-volume tank allow convenient, problem-free and energy-saving operation.

    A maintenance-free capacitor motor with thermal overload protection and a large-volume tank allow convenient, problem-free and energy-saving operation.

  • Compact and saves space

    Compact and saves space

    The Manometer and the pressure switch are integrated in the design in a space-saving fashion. This makes the Pressure Tank Unit very compact and it requires little space at its installation site.

    The Manometer and the pressure switch are integrated in the design in a space-saving fashion. This makes the Pressure Tank Unit very compact and it requires little space at its installation site.

Технические характеристики
Номинальная мощность 850 Вт
Max delivery capacity 3500 l/h
Макс. давление 4,5 бар
Max self-priming suction 8 м
Max delivery head 45 м
Давление включения 2 бар
Feed impeller Jet
Макс. температура жидкости 35 ° C
Масса 13,7 кг
Длина кабеля 1,5 м
Power cable type H05 RNF
Класс электрической защиты IP X4
Продукты и цены
Коммерческая справка Артикул Добавить к списку
1772-20 900 95 09-01
Устаревшая продукция!
1772-29 900 95 10-01
Устаревшая продукция!

Инструкции и документация

Инструкции и документация

Пожалуйста, посетите раздел «Инструкции и документация» для поиска и загрузки руководств по эксплуатации и другой документации GARDENA.

Руководства пользователя
Accessories
Шланг заборный с фильтром 3,5 м Шланг заборный с фильтром 3,5 м

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose...

Шланг заборный с фильтром 7 м Шланг заборный с фильтром 7 м

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose...

GARDENA Шланг заборный GARDENA Шланг заборный

With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread...

Шланг заборный 19 мм (3/4"), в бухте 50 м Шланг заборный 19 мм (3/4"), в бухте 50 м

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 19 mm (3/4") and is supplied without connectors and fittings.

Шланг заборный 25 мм (1"), в бухте 45 м Шланг заборный 25 мм (1"), в бухте 45 м

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 25 mm (1") and is supplied without connectors and fittings.

шланг заборный 32 мм (5/4") – 25 м шланг заборный 32 мм (5/4") – 25 м

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 32 mm (5/4") and is supplied without connectors and fittings.

Коннектор для заборного шланга 19 мм (3/4") Коннектор для заборного шланга 19 мм (3/4")

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1720-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 19 mm (3/4") and has a female thread with 33.3 mm (G 1).

Коннектор для заборного шланга 25 мм (1") Коннектор для заборного шланга 25 мм (1")

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1721-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 25 mm (1") and has a female thread with 33.3 mm (G 1).

Фильтр с клапаном противотока 19 мм (3/4") Фильтр с клапаном противотока 19 мм (3/4")

Simply connect the Suction Filter to the 19 mm (3/4") Suction Hose sold by the metre (Art. No. 1720-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more...

Фильтр с клапаном противотока 25 мм (1") Фильтр с клапаном противотока 25 мм (1")

Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient...

GARDENA Фильтр с клапаном противотока для заборного шланга GARDENA Фильтр с клапаном противотока для заборного шланга

Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the...

GARDENA Подводка 33,3 мм GARDENA Подводка 33,3 мм

Ideal for vacuum-resistant connection of a pump to a borehole or pipework. The hose has a length of 0.5 m, a diameter of 25 mm (1") and a female thread of 3.3 mm (G 1) at both ends.

GARDENA Выключатель поплавковый GARDENA Выключатель поплавковый

Ideal for use with the Submersible- and Submersible Pressure Pumps, Garden Pumps and Pressure Tank Units; depending on the water level, automatically switches the pump on and off. Equipped with a 10 m long special power cable H07 RNF.

GARDENA Защита от работы всухую GARDENA Защита от работы всухую

The Dry-running Safety automatically switches the pump off in the absence of pumping media and thereby protects, e.g. a Garden Pump, Submersible Pump or Pressure Tank Unit against damages. It has a 33.3 mm (G 1) mating thread.

GARDENA Комплект для подсоединения шланга 1/2" GARDENA Комплект для подсоединения шланга 1/2"

For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.

GARDENA Комплект для подсоединения шланга 3/4" GARDENA Комплект для подсоединения шланга 3/4"

For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.

Фильтр предварительной очистки до 6000 л/ч Фильтр предварительной очистки до 6000 л/ч

Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The...