The adjustable Inline Drip Head is ideally suited – as part of the GARDENA Micro-Drip-System – for irrigation of shorter plant rows with varying water requirements. Using the Inline Drip Head, the required water quantity can be adjusted. In this way, 0 to approx. 20 litres per hour can be provided. The cover is detachable and has an integrated cleaning needle that allows easy cleaning of a dirtied drip head. Ten drip heads and one cap are included.

Add to your wish list Locate your nearest retailer
  • Water-saving irrigation

    Water-saving irrigation

    With the Micro-Drip-System drip irrigation, the water quantity per plant can be exactly dosed, so that no water is wasted.

  • Individually adjustable

    Individually adjustable

    Depending on the requirements of the individual plants, between 1 and 8 litres per hour can be provided.

  • Easy installation

    Through the patented "Quick & Easy" connection technology, all components can be effortlessly combined and easily separated again if required.

  • Easy to clean

    Thanks to the removable cover with integrated cleaning needle, the needle is always accessible and can be easily used to clean the drip head.

  • Water-saving watering

    With the GARDENA Inline Drip Head, plant rows with similar water requirements can be easily irrigated and water can be saved.

Articles & pricing
Commercial reference Article no Add to wish list
1392-20 900 91 51-01
1392-26 966 48 69-01
1392-50 900 91 52-01

Manuals & documentation

Manuals & documentation

Please visit the Instruction manuals and documentation section to search and download GARDENA operation manuals and other documentation.

Instructions manuals

Product sheet

Generate and download product sheet in Adobe Acrobat (pdf format).

Download Product sheet
Standard equipment
Supply Pipe 4.6 mm (3/16") Supply Pipe 4.6 mm (3/16")

The GARDENA Supply Pipe 4.6 mm (3/16") is the supply pipe for Drip Heads and Spray Nozzles. It is UV-resistant and impervious to light, thereby guaranteeing long use. It can be installed above and below ground. The length of the pipe is 50 metres.
Supply Pipe 4.6 mm (3/16") Supply Pipe 4.6 mm (3/16")

The GARDENA Supply Pipe 4.6 mm (3/16") is the supply pipe for Drip Heads and Spray Nozzles. It is UV-resistant and impervious to light, thereby guaranteeing long use. It can be installed above and below ground. The length of the pipe is 15 metres.
Accessories
4.6 mm (3/16") 4.6 mm (3/16")

The GARDENA Plug as part of the GARDENA Micro-Drip-System seals the hole in the Connecting Pipe or seals off the Supply Pipe. Ten pieces are included.
T-Joint 4.6 mm (3/16") T-Joint 4.6 mm (3/16")

The GARDENA T-Joint as part of the GARDENA Micro-Drip-System serves to branch the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten T-Joints are included.
4-Way Coupling 4.6 mm (3/16") 4-Way Coupling 4.6 mm (3/16")

The GARDENA 4-Way Coupling as part of the GARDENA Micro-Drip-System serves to branch the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten pieces are included.
Connector 4.6 mm (3/16") Connector 4.6 mm (3/16")

The GARDENA Connector as part of the GARDENA Micro-Drip-System serves to extend the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten pieces are included.
Shut-Off Valve 4.6 mm (3/16") Shut-Off Valve 4.6 mm (3/16")

The GARDENA Shut-Off Valve 4.6 mm (3/16") as part of the GARDENA Micro-Drip-System serves to shut off individual lines of Supply Pipes. With the Shut-Off Valve, the throw of the Micro Rotor Sprinkler 360° can be infinitely adjusted. Thanks to the...
L-Joint 4.6 mm (3/16") L-Joint 4.6 mm (3/16")

The GARDENA L-Joint as part of the GARDENA Micro-Drip-System allows exact changing of direction of the Supply Pipe. Thanks to the patented "Quick & Easy" connection technology, installation is especially easy. Ten L-Joints are included.