Why not use free rain- or well water for your garden, or for the toilet or washing machine in the home? The compact GARDENA Electronic Pressure Pump 6000/5 inox LCD is excellently suited for mobile and stationary use – wherever you need it. In operation, the premium model is extremely quiet: the water flows through a 4-stage feed impeller thereby significantly reducing noise. The stainless steel pump housing joins convenience and a long life. A number of integrated functions render the Electronic Pressure Pump long-life, convenient and safe in operation. With the practical LCD display you have full control over e.g. pressure and delivery quantity, which are shown on the clear display of the pump. In addition, the LC display on the pump warns of frost and informs of potential faults. An Electronic Manometric Switch automatically activates the Electronic Pressure Pump when water is required and then switches it off afterward. A dry-running safety prevents damage to the pump in the absence of pumping media. To prevent impurities and sand from entering the pump and causing faults, a large-volume filter is integrated in the Electronic Pressure Pump. Practical, as an external pre-filter is then not necessary. A backflow-preventer prevents dry-running of the hose after a break or when the pump has been taken out of operation. Another advantage: through the remaining water in the hose, the re-suction time when re-starting is significantly shortened. Only high-quality materials are used for the pump, thereby guaranteeing powerful yet low-noise operation. A maintenance-free capacitor motor with thermal protection switch efficiently and quietly pumps the water through a 4-stage feed impeller via pressure. For easy handling, a large filling opening facilitates filling of the pump before operation. Rubber feet ensure stable standing and low-vibration, noise-dampened operation. And thanks to the double outlets – one of which is swivellable – the simultaneous operation of two connecting devices is possible. In the case of impending frost, the Electronic Pressure Pump can be easily emptied using a drain screw. GARDENA thinks of everything.

  • Everything under control

    Everything under control

    On an LC display, clear information regarding the pump operation, such as pressure and water flow, is presented – also over time. In addition to a frost warning, faults in the system are also indicated. With this, you always have everything under control.

  • Saves energy and is convenient

    Saves energy and is convenient

    An Electronic Manometric Switch activates the pump when water is required and then switches it off afterward. All automatic. That saves energy, spares the pump and is convenient.

  • Protection against impurities

    To prevent impurities and sand from entering the pump and damaging it, a large-volume filter is integrated. Practical, as no external pre-filter is required.

  • Quiet as a whisper yet powerful

    Quiet as a whisper yet powerful

    The water flows through a 4-stage feed impeller that significantly reduces noise without compromising the high performance of the pump – for pleasantly quiet pump operation.

  • Protection against dry-running

    An integrated Dry-running Safety protects the pump against damage by stopping operation in the absence of pumping media, thereby preventing dry-running of the pump.

Specifications
Power rating 1000 W
Max delivery capacity 5500 l/h / 1452.95 gph
Max pressure 4.6 bar / 66.7 psi
Max self-priming suction 8 m / 26.25 feet
Max delivery head 46 m / 150.92 feet
Feed impeller 4 Stages
Weight 13 kg / 28.66 lbs
Cable length 1.5 m / 4.92 feet
Power cable type H07 RNF
Electric protection class IP X4
Articles & pricing
Commercial reference Article no Add to wish list
1769-20 900 95 04-01
1769-29 900 95 05-01

Manuals & documentation

Manuals & documentation

Please visit the Instruction manuals and documentation section to search and download GARDENA operation manuals and other documentation.

Instructions manuals

Product sheet

Generate and download product sheet in Adobe Acrobat (pdf format).

Download Product sheet
Accessories
Suction Unit 3.5 m Suction Unit 3.5 m

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose...

Suction Unit 7 m Suction Unit 7 m

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose...

Suction Hose 19 mm (3/4") – 50 m Suction Hose 19 mm (3/4") – 50 m

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 19 mm (3/4") and is supplied without connectors and fittings.

Suction Hose 25 mm (1") – 45 m Suction Hose 25 mm (1") – 45 m

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 25 mm (1") and is supplied without connectors and fittings.

Suction Hose 32 mm (5/4") – 25 m Suction Hose 32 mm (5/4") – 25 m

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 32 mm (5/4") and is supplied without connectors and fittings.

Suction Hose 3.5 m Suction Hose 3.5 m

With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread...

Suction Hose Fitting 19 mm (3/4") Suction Hose Fitting 19 mm (3/4")

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1720-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 19 mm (3/4") and has a female thread with 33.3 mm (G 1).

Suction Hose Fitting 25 mm (1") Suction Hose Fitting 25 mm (1")

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1721-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 25 mm (1") and has a female thread with 33.3 mm (G 1).

Suction Filter with Backflow Preventer 19 mm (3/4") Suction Filter with Backflow Preventer 19 mm (3/4")

Simply connect the Suction Filter to the 19 mm (3/4") Suction Hose sold by the metre (Art. No. 1720-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more...

Suction Filter with Backflow Preventer 25 mm (1") Suction Filter with Backflow Preventer 25 mm (1")

Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient...

Suction Filter with Backflow Preventer 19 mm (3/4")/25 mm (1") Suction Filter with Backflow Preventer 19 mm (3/4")/25 mm (1")

Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the...

Bore Hole Suction Hose Bore Hole Suction Hose

Ideal for vacuum-resistant connection of a pump to a borehole or pipework. The hose has a length of 0.5 m, a diameter of 25 mm (1") and a female thread of 3.3 mm (G 1) at both ends.

Pump Preliminary Filter 6,000 l/h Pump Preliminary Filter 6,000 l/h

Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The...

Pump Connection Set for 13 mm (1/2") hoses Pump Connection Set for 13 mm (1/2") hoses

For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.

Pump Connection Set for 19 mm (3/4") hoses Pump Connection Set for 19 mm (3/4") hoses

For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.