Garden Pump 3000/4 Jet(1422-20)

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose...

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose...

With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread...

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 19 mm (3/4") and is supplied without connectors and fittings.

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 25 mm (1") and is supplied without connectors and fittings.

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 32 mm (5/4") and is supplied without connectors and fittings.

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1720-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 19 mm (3/4") and has a female thread with 33.3 mm (G 1).

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1721-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 25 mm (1") and has a female thread with 33.3 mm (G 1).

Simply connect the Suction Filter to the 19 mm (3/4") Suction Hose sold by the metre (Art. No. 1720-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more...

Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient...

Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the...

Ideal for vacuum-resistant connection of a pump to a borehole or pipework. The hose has a length of 0.5 m, a diameter of 25 mm (1") and a female thread of 3.3 mm (G 1) at both ends.

Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The...

Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The...

Ideal for use with the Submersible- and Submersible Pressure Pumps, Garden Pumps and Pressure Tank Units; depending on the water level, automatically switches the pump on and off. Equipped with a 10 m long special power cable H07 RNF.

With the Electronic Manometric Switch, a Garden Pump can be easily converted to an Electronic Pressure Pump. The push-button has 3 functions: 1. It automatically switches the pump on when the water pressure falls and off again when the maximum...

For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.

For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.