Easy to handle, robust dirty water pumps for drawing water as well as pumping dirty water between and from containers. Article No. 1790, 1795, 1802: with float switch for cut-in and cut-out. Infinitely variable via panel of cable holder (except Art. No. 1790). Plug-in device for simple switching to permanent manual operation (except Art No. 1790). Article No. 1797, 1799: aquasensor starts the pump automatically from a low water level of only 65 mm. Infinitely variable sensor cut-in and cut-out level, independent from each other. Low-wear pump impeller for longer service life. Thermal protection switch protects the motor against overload. Universal connection for 13 mm (1/2"), 16 mm (5/8"), 19 mm (3/4"), 25 mm (1"), 38 mm (1 1/2") hoses (all models) and additional 50 mm (2") hoses (for Art. No. 1802). Connection thread 41.9 mm (G 1 1/4), for model 20000 inox: 47.8 mm (G1 1/2). 10 m special connection cable for versatile use, also for draining building pits and garden ponds. Salt water, aggressive and easily combustible substances and food must not be pumped. Quiet, maintenance-free capacitor motor. 4-colour display carton.
Robust and powerful use
The Dirty Water Pump is multifarious in use and can transfer or drain dirty water with particles up to 25 mm in diameter.
Automatic and flexible
For comfortable handling, an adjustable Float Switch automatically switches the pump on or off, depending on the water level. Through a cable holder for the Float Switch, the various cut-in and cut-out heights can be precisely and flexibly adjusted.
-
Permanent manual operation
Switch to permanent manual operation – no problem. Simply plug the Float Switch into the device on the pump, finished.
-
Long service life
A low-wear feed impeller and a robust housing guarantee a long life and problem-free operation.
-
Individual connection
Through the universal connection, hoses with 13mm (1/2") to 50 mm (2") can be used.
