In combination with a GARDENA Water Computer C 1060 (Art. No. 1864, 1866), the GARDENA Water Distributor automatic ensures that up to six different areas in your garden are automatically irrigated, one after the other. For example, you can water the lawn with a sprinkler, then potted plants, beds, hedges and flower boxes with a drip irrigation system. As per the Water Computer programmes, the water outlets will automatically open, one after the other. Practical: the Water Distributor can be flexibly adjusted to the conditions in your garden. That means, you can water only two areas or up to six. The non-required water outlets are simply deactivated using the setting lever. As the various plants in your garden need different amounts of water, the watering duration can also be individually set based on the programming on the Water Computer. The Water Distributor transports the desired quantity to the right place. This intelligent solution is also ideal when the available water quantity is insufficient for simultaneous supply of all watering accessories. Simply mount the Water Distributor on the side of the house or on the ground. It is secured on a ground plate and can be removed at any time. As all water outlets are placed in one direction, the device takes up very little space. It is equipped with 26.5 mm (G ¾) male threads and is supplied with five Tap Connectors (Art. No. 901) and three end caps.
- Support technique
- Aménagement paysager
- Planificateurs et guides d'achat