The Below and Above Ground Drip Irrigation Line with a diameter of 13.7 mm is installed underground where it is not visible and serves the irrigation of bordering plants and lawn areas. The drip head spacing in the pipe is 30 cm, each head gently waters 1.6 l/h. The drip heads are self-sealing so that they do not dirty after being put into storage. The drip heads have a root blocker that prevents roots from entering the installed, underground pipe. With a Master Unit fitted in the middle, the Drip Irrigation Line can be extended with the Extension Set Art. No. 1395-20; the maximum length is 200 metres. The water pressure is the same at every point in the Drip Irrigation Line, to ensure even irrigation. The Drip Irrigation Line is supplied ready-to-connect with the Master Unit 1000, 1 End-piece and 1 T-Joint, and has a length of 50 metres.
Water-saving and targeted irrigation
As the drip heads are installed underground, the water is supplied right where it is needed without waste.
-
Low-maintenance
The self-sealing drip heads prevent dirtying of the pipe after switch-off of operation. A root blocker against the entry of roots renders the Drip Irrigation Line very durable and thereby longlife.
-
Even irrigation
The water pressure is the same at every point in the Drip Irrigation Line, thus guaranteeing even irrigation.
-
Immediately ready-to-use
As the Master Unit 1000, 1 End-piece and 1 T-Joint are included, the Drip Irrigation Line can be immediately installed and connected.
