How do I find a breakage of the boundary wire?
Breaks in the loop wire are usually the result of unconscious physical damage to the cable such as when gardening with a shovel. Breaks can also be due to the high tension in the wire during installation. Mowing the grass too low right after the installation can damage cable insulation. A defective splicing of the loop wire can also lead to disruptions several weeks after the splice was formed.
A wire break can be located by gradually halving the distance of the loop where the break may have occurred until there is only a very short section of the wire left.
There is an error message in the display – what do I do?
In the Operator’s Manual there is a list of the most common error messages and recommended actions.